NEW XE-Station 3 Max
XE-ST3-MAX

XE-Station 3 Max

Flagship AI face authentication terminal

A 7-inch terminal that authenticates a face in 0.4 seconds — with masks, glasses and hard backlight — and holds 100,000 users on the door.

0.4 sFace authentication
100,000Users on device
1.2 mRecognition distance
7"Capacitive touch display
Overview

Flagship AI face authentication terminal

XE-Station 3 Max is built for the doors that never stop: lobby turnstiles at shift change, hospital wards, data-centre mantraps. Its dual-sensor imaging stack reads a face in 0.4 seconds at up to 1.2 metres, and keeps reading it through masks, safety glasses, beards and direct sunlight.

Liveness detection is tested against ISO/IEC 30107-3 presentation attacks — printed photos, phone and tablet screens, cut-out masks and 3D replicas — and runs entirely on the device, so nothing about a person leaves the terminal unless you want it to.

Features

What XE-Station 3 Max does differently

AI face authentication

A dedicated neural processor matches in 0.4 s with masks, glasses, headwear and 100,000 enrolled users.

Certified anti-spoofing

Presentation attack detection tested to ISO/IEC 30107-3 against print, screen, mask and 3D replica attacks.

Works in real light

Dual visible and infrared sensors handle 0 to 25,000 lux, from a dark loading bay to full sun on a glass lobby.

Every credential, one door

Face, fingerprint, mobile key over BLE and NFC, QR codes, encrypted cards and PIN in any combination.

Nothing leaves in the clear

Templates are irreversible, stored with AES-256 in a secure element, and synchronised over TLS 1.3.

On-prem or cloud

The same terminal registers to XipherOne inside your network or to a XipherCloud tenancy, with no firmware swap.

Specifications

XE-ST3-MAX

Specifications are subject to change without notice. Ask us for the signed datasheet before you write a tender against these figures.

Biometrics

Authentication time0.4 s (1:N, 100,000 users)
Recognition distance0.4 m to 1.2 m
False acceptance rate< 0.0001 %
Liveness detectionISO/IEC 30107-3 tested
Fingerprint sensorOptical, 500 dpi, 20 x 20 mm

Capacity

Users (face)100,000
Users (fingerprint)100,000
Cards100,000
Event logs5,000,000 with 100,000 images

Hardware

CPU2.0 GHz octa core + NPU
Memory16 GB flash + 2 GB RAM
Display7" capacitive touch, 1280 x 800
Camera5 MP visible + 5 MP infrared
Dimensions145 x 218 x 34 mm
Weight690 g
Ingress / impactIP65, IK08
Operating temperature-20 °C to 55 °C

Credentials

RF125 kHz EM, 13.56 MHz MIFARE, DESFire EV1/EV2/EV3, FeliCa, iCLASS SE/Seos
MobileBLE 5.2, NFC, QR
PIN4 to 16 digits

Interface

Network10/100 Mbps Ethernet, Wi-Fi 6, PoE+
RS-4851 channel, OSDP v2
Wiegand1 input / 1 output
Relay1 door, 1 auxiliary
Inputs2 supervised, 1 tamper

Power

Input12 VDC 3 A or PoE+ (IEEE 802.3at)
ConsumptionMax 24 W
Enquire

Talk to us about XE-Station 3 Max

Tell us the number of doors, the sites involved and any standards you have to meet. We will come back with a specification, a partner introduction and a price — usually within one business day.

  • Design support from a real engineer, not a call centre
  • Introduction to a certified integrator in your country
  • Evaluation units available for qualified projects

We use these details only to answer your enquiry. Nothing is shared with third parties.